Product ID:75-1626-847,DEVELOPER (DV-10) FOR KYOCERA(S
MSDS Date:03/14/1990
FSC:6850
NIIN:01-296-5986
MSDS Number: BPFLR

KYOCERA CORP MIE-TAMAKI FACTORY

704-19 NOJINO TAMAKI-CHO
NATARAI-GUN MIE-PREF. 519-04 JAPAN

Emergency Phone: 415-748-6680

Info Phone: 415-748-6680

Preparer: Y. HAZEYAMA

Cage: NO376

KYOCERA CORP MIE-TAMAKI FACTORY

NATARAI-GUN MIE-PREF. 519-04 JAPAN, CA 94501 US

Telephone: 415-748-6680

Cage: NO376

POLYESTER RESIN

POLYPROPYLENE WAX

CAS: 9003-07-0

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3

SILICA

CAS: 60676-50-0

IRON (III) OXIDE

CAS: 1309-37-1

RTECS: NO7400000

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3(FE),B2; 9293

ZINC OXIDE

CAS: 1314-13-2

RTECS: ZH4810000

OSHA PEL 15MG/M3 TDUST/5 FUME

ACGIH TLV: 10MG/M3 TDUST; 9293

COPPER OXIDE-IRON, MANGANESE OXIDE PIGMENT

CAS: 68186-94-7

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: NON-IRRITATING, NON-TOXIC. EYE:
DUST OF THE PRODUCT MAY CAUSE EYE IRRITATION. INHAL: DUST OF THE
PRODUCT MAY CAUSE LUNG IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:NONE
Medical Cond Aggravated by Exposure:NOT APPLICABLE.

First Aid:SKIN: WASH WITH SOAP AND WATER. INHAL: REMOVE FROM EXPOSURE.
EYES: IMMEDIATELY FLUSH WITH WATER FOR AT LEAST 15 MINUTES. INGEST:
CALL MD.

Extinguishing Media:USE MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NOT APPLICABLE.

Spill Release Procedures:SWEEP UP OR CLEAN WITH VACUUM CLEANER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP IN CLOSED PACKAGE.
Other Precautions:NO OTHER SPECIAL PRECAUTIONS FOR SAFETY REASONS ARE
NECESSARY.

Respiratory Protection:NORMALLY NOT REQUIRED. NIOSH/MSHA APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST: PREFERABLE. MECHANICAL (GENERAL):
ACCEPTABLE.
Protective Gloves:NORMALLY NOT REQUIRED.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE
Work Hygienic Practices:PREFERABLE (INSTRUCTION FOR WORKERS).
Supplemental Safety and Health
MFR PART NO: LASER PRINTER.

Spec Gravity:N/K (H*2O=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLACK POWDER, ALMOST NO ODOR.

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:CO, CO*2.

Waste Disposal Methods:WASTE MATERIAL MAY BE DUMPED OR INCINERATED
UNDER THE CONDITIONS WHICH MEET ALL FEDERAL, STATE AND LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.